MASTER FUNCTIONS
1. TWS
Press this button to engage True Wireless
Stereo.
2. BLUETOOTH
Press this button to engage Bluetooth.
3. POWER / SIGNAL / LIMIT:
Use the LED signifiers to assess the current
status of the Modular Column at a glance.
4. THRU OUTPUT
Use these outputs to send the signal from the
Modular Column to an external PA system.
5. INPUT
Use these inputs to accept signal into the
Modular Column from an external PA system.
6. DSP PRESET
The DSP knob allows you to choose from one
of three presets. (See DSP information sheet on
page 10)
• Monitor
• DJ
• Live
7. SAT VOL
Adjust this knob for independent control over
the satellite speakers.
8. SUB VOL
Adjust this knob for independent control over
the subwoofer.
9. SUB OUT
Use this output to physically link the two subs
together.
10. VOLTAGE ADJUSTER
Use this to switch between 115V and 230V.
Please ensure the setting matches your local
supply before switching on the unit.
11. MAIN POWER INPUT
Use the supplied mains cable to provide power
to the unit via a mains socket. Please note only
use the same type of fuse that comes installed
from the factory
12. POWER ON/OFF
Use this to turn the unit on and off.
5
To Next Page
Loading...
Need help?
General
