Sudio FLYG - Sudio Flyg Pairing Instructions; Initiate Pairing Mode; Connect Device; Confirm Connection

4 5
1.
2.
3.
Hold the button for 8
seconds until the LED
starts blinking
When the LED
stops blinking, your
device is paired to
Sudio Flyg
ENGLISH
Enter pairing mode
on your device. Hold
the device close to the
bluetooth adapter
PAIRING
(Hold 8 sec)
To reset the connections,
click the button three
times quickly
Click once to see
current battery status
If only one output
available, use the main pin.
LED turns red when
charging
ENGLISH
RESETTING
POWER
PINS CHARGING
(3 click)
(1 click)
Red <10%
White/Red 10 –50%
White
On/Off
50–100%
(Hold 5 sec)