sugar-valley BIONET - User Manual

BIONET
QUICK INSTALATION GUIDE
Electrolysis
RCA flow detector
pH probe
Redox probe
Ioniser Cu/Ag
Mains connection 220v.
3.15A fuse
250 mA fuse
On-off switch
Air vent
Acid pump connection
1
2
3
4
5
6
7
8
9
10
11
DESCRIPTION
1
Electrode housing
Ionization housing (2/4/6 e)
Copper/silver electrodes
Electrode bolt
Electrode cable
1
2
3
4
Cell
Electrolysis cell
RCA flow detector
Cell connector
Flow/gas detector
1
2
3
Optional extras
pH Probe
Concentric seal
Gasket
5
6
Conductividad ProbeRedox Probe
Cell housing
Probe
Probe casing
Connection housing
1
2
3
Probe
Probe casing
Connection housing
1
2
3
Probe
Probe casing
Connection housing
1
2
3
1
2
3
1
2
3
1
2
3
1
3
3
2
4
5
6
10
7
8
9
6
1
2
3
4
5
11
10
1
4
5
2
3
5
4
The salt water electrolysis produces Chlorine on the bases of salt water of low salinity (approximately 5g Salt per litre). As the
swimming pool water containing the salt flows through the electrolysis cell, the salt is converted to Sodium-hypo-chloride (liquid
chlorine). Organic mater present in the water is oxidised and eliminated by the chlorine. The Sodium-hypo-chloride reconverts into
salt on its way back to the swimming pool.
This process is combined with a Copper Silver ionisation which provides us with a constant flocculation and an additional
disinfectant, eliminating bacteria and algae. The result is exceptional clear and transparent Water.
Electronic unit

Summary

1 DESCRIPTION

Electronic Unit Components

Details the components of the electronic unit, including ionizer, electrolysis, probes, and connections.

Cell and Electrode Housing Components

Outlines the parts within the electrolysis cell and the electrode housing.

Optional Extras

Lists and describes optional probes for pH, Redox, and Conductivity.

2 INSTALLATION

Electrical Consumption and Overheating Warning

Provides electrical consumption data and a warning about titanium cell connection overheating.

System Installation Diagram and Synchronization

Illustrates the system setup and explains synchronization with filtration.

3 INITIAL ADJUSTMENTS

Water Parameter Adjustments

Guides on adjusting water alkalinity, pH, and chlorine levels.

Adding Salt and Initial Setup

Instructions for adding salt to the pool and initial water preparation.

4 START UP

Electronic Housing Display Overview

Explains the electronic housing display, status LEDs, and button functions.

Startup Modes and Indicators

Details startup indicators like conductivity, cell life, flow, and ionization intervals.

5 REDOX CONTROL SYSTEM

Adjusting the Ideal Redox Set Point

Step-by-step guide to finding and setting the optimal REDOX level for water sterilization.

6 MAINTENANCE

Initial and Titanium Cell Maintenance

Covers care during the first 10-15 days and procedures for cleaning the titanium cell.

Routine Checks and General Maintenance

Details fortnightly, monthly checks, and general maintenance for the system.

7 MENU ACCESS AND CALIBRATION

Accessing User Menu and Display Indicators

Explains how to access the user menu and the meaning of various display indicators.

Parameter Adjustment and Probe Calibration

Guides on adjusting system parameters and calibrating pH, Redox, and Conductivity probes.

8 TROUBLESHOOTING

Common Display and Electrolysis Issues

Addresses issues like blank displays, low electrolysis intensity, and low chlorine levels.

Hydrolysis and Water Quality Problems

Troubleshoots hydrolysis errors, excess oxidation, white flakes, and rust on components.

Cell, Polarity and General Warnings

Covers titanium cell incrustation, polarity issues, and general operational warnings.

Safety, Earthing, and Chemical Handling

Provides important information on security, earthing, and safe handling of chemicals.

sugar-valley BIONET Specifications

General

Brand	sugar-valley
Model	BIONET
Category	Swimming Pool Cleaners
Language	English