SRC Service Manual
Revision 02
Aug 2007
10.5 Remote Monitoring Option
The SRC-250 to 1000 can be simply connected to an external supervisor system (otherwise known as
BMS or Building Management System).
To do so an (optional) RS485 serial card is fitted to the back of the microprocessor.
This allows direct connection to a BMS using the MODBUS RTU protocol, without the need for any
intermediate Gateway.
Once connected to the BMS it is possible to achieve:
Visualization of:
• Dew point & other temperatures
• Alarms
• Working hour counters
Control of:
• Dryer on/off
• Alarm reset (if allowed)
Page 49 of 56
To Next Page
Loading...
