To Next PageTo Next Page
Need help?Do you have a question about the Sullair SRC Series and is the answer not in the manual?
Keep manual for machine life, read before operation, subject to changes.
Symbols for personal danger, equipment damage, and required technician.
Unit must remain upright, protected from weather and impacts, respect limits.
Use suitable forklift, avoid impacts.
Units are factory tested; check condition upon receiving and notify transport company.
Stack units as per packing notes, store in clean, dry place, respect limits.
Install dryer indoors, protected from elements. Ensure correct connections.
Provide adequate clearance around the unit for ventilation and access.
Details on different air-cooled (Ac) versions.
Recommendations to prevent internal damage and compressor issues.
Use approved cable, connect to terminals, install circuit breaker.
Connect to drainage system, avoid closed circuits, check flow.
Ensure correct installation, closed inlet valves, and proper power supply.
Start dryer before compressor, follow model-specific power-on steps.
Keep dryer on during compressor operation, it works automatically.
Stop dryer after compressor stops or air flow is interrupted.
Overview of indicators and switches on the control panel.
Detailed view of the control panel for different models.
Explains the different operating states and energy saving function.
Accessing and modifying operational parameters.
Lists and explains various alarms and warning signals.
Safety checks before maintenance, use of original parts, refrigerant handling.
Information on R407C refrigerant properties and handling precautions.
Recommended maintenance schedule for efficiency and reliability.
Guidelines for recycling and disposal of components.
General
