Summer 07600C - Page 4

4
installation:
5
Connect the
extension frames
to gate frame by
inserting the pins
into the holes
in the gate and
extension frames.
Slide tension bolts
into upper and lower holes
on both sides of
extension frames
(or gate frame if no extensions
are being used).
4
!
• If choosing gate configuration A, skip this step.
• If choosing gate configuration B, add only one short gate extension to either side of the gate frame.
• If choosing gate configuration C, add only the large gate extension to either side of the gate frame.
• If choosing gate configuration D, add only one short gate extension and the long extension to either
side of the gate frame.
x 6
H
x 6
I
x 4