EasyManua.ls Logo

Summer 27903Z - User Manual

Summer 27903Z
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BANISTER & STAIR METAL GATE
WITH DUAL INSTALLATION KIT
INSTRUCTION MANUAL
27903Z
Please read the following instructions
and warnings carefully.
Keep this instruction manual
and save for future reference.
For technical support contact us at 1-401-671-6551 or
www.summerinfant.com/contact.
Tools required: Phillips head screwdriver
and drill (neither included).
For use with children from 6 to 24 months.
Adult assembly required.
Keep small parts away from children.
6/19
Colors and styles may vary.
MADE IN CHINA.
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-401-671-6551
© 2019 Summer Infant (USA), Inc.
WARNING
ALWAYS
install and use gate as directed, using all required parts.
• Install according to manufacturers instructions.
STOP
using when a child can climb over or dislodge the gate.
• Use only with the locking/latching mechanism securely engaged.
NEVER
use a gate to keep child away from pool.
NEVER
leave child unattended.
ALWAYS
close and lock the gate behind you.
This product will not necessarily prevent all accidents. Proper adult supervision is
required at all times.
• Do not use if any components are missing or damaged.
• Adult assembly required.
• Exercise care when unpacking and assembling product.
• Intended for use with children from 6 months through 24 months.
Do not mount to spindles less than 2 in. in diameter.
Check daily that banister brackets are securely attached and gate is securely
anchored to banisters and/or wall.
Children have died or been seriously injured when gates are not securely installed.
Question and Answer IconNeed help?

Do you have a question about the Summer 27903Z and is the answer not in the manual?

Summary

Safety and Product Overview

Critical Safety Warnings

Essential safety warnings regarding gate installation and use to prevent child injury.

Product Identification and Usage

Identifies the product model and basic usage information for children.

Components and Installation Tools

List of Gate Components

Detailed listing of all parts required for gate assembly, labeled with letters.

Required Installation Tools

Specifies the necessary tools, such as screwdrivers and drills, for proper installation.

Hinge Assembly Instructions

Option A: Square Top Banister Hinge Mount

Step-by-step guide for non-drilling hinge installation on square top banisters.

Option B: Wall Mount Hinge Installation

Instructions for wall mounting hinges on wood or wallboard, with or without baseboards.

Gate and Support Foot Assembly

Gate Assembly for Wall Mount

Procedure for attaching the gate to hinges when installed on a wall.

Support Foot Assembly

Steps to install the support foot for gate stability and correct floor contact.

Gate Assembly for Banister Mount

Instructions for attaching the gate to hinges when installed on banisters.

Latch Assembly and Operation

Latch Mechanism Installation

Detailed steps for assembling and attaching the top and bottom latch catches.

Latch Assembly Variations

Specific latch assembly details for banister and wall-mounted configurations.

Gate Operating Instructions

Guidance on how to properly close, open, and remove the gate.

Gate Maintenance

Maintenance Procedures

Instructions for checking hardware, cleaning the gate, and handling damaged components.

Summer 27903Z Specifications

General IconGeneral
BrandSummer
Model27903Z
CategoryIndoor Furnishing
LanguageEnglish

Related product manuals