Summer 27903Z - Gate Maintenance; Maintenance Procedures

replacement hardware kit #27900-10:
• Check all hardware to ensure gate is securely in place.
• Do not use gate if any of the components are damaged or missing.
• Wipe surface with a damp cloth or sponge, using mild detergent and warm water to clean. Towel dry.
maintenance:
Gate Assembly
Latch Assembly
Hinge Assembly
Support Foot Assembly
Gate ts openings 31” to 46” (79cm to 117 cm)
!
IMPORTANT: Place the gate on top landing at a distance of 2 in. from the
edge of top stair or the furthest it can be placed based on the size and
locations of your banisters.
3
See page 7
for bottom latch
assembly.
See page 7
for top latch
assembly.