Summer 21290 - Peg Perego Viaggio Adapter Installation; Adapter Installation Safety Warnings; Install and Secure Car Seat Adapter; Set and Connect Infant Car Seat

13
4
Peg Perego® Viaggio® - Adapter Strap Required (ref. p.11)
car seat adapter installation for use with Peg Perego® Viaggio®:
press down on brake
pedal to engage brake
• Infant car seat adapter must be securely locked
to stroller before infant car seat is placed on stroller.
• NEVER install car seat carrier without car seat adapter
• CHECK to confirm that car seat adapter and car seat
carrier are securely locked to the stroller
• NEVER lift stroller by infant carrier handle
• Read all warnings on front page of this
instruction booklet and on product
WARNING:
PREVENT SERIOUS INJURY OR DEATH FROM FALLS
click!
align car seat and
set it into adapter
finished!
align seat with frame
push down
8
7
click! click!
clip canopy onto seat frame install bumper bar
and cupholder
10
9
click!
click!
click!
click!
click!
click!
NOTE: before use, ensure that all
stroller connections are secure.
!
1
2
3
attaching car
strap adapter
4
align car seat adapter with arrow
pointing forward and push down onto
frame
arrow faces
forward
IMPORTANT! REAR FACING ONLY!
Do NOT install forward facing.
!
to release, undo strap
and lift up by handle
5
IMPORTANT! Pull up on
car seat to confirm that
it is secured properly
!
feed
through both
belt paths!
snap buckle
and pull
tight!
FRONT