3
14
Chicco® Keyfit® - Adapter Strap Required (ref. p.11)
car seat adapter installation for use with Chicco® Keyfit®:
press down on brake
pedal to engage brake
• Infant car seat adapter must be securely locked
to stroller before infant car seat is placed
on stroller.
• NEVER install car seat carrier without car seat adapter
• CHECK to confirm that car seat adapter and car seat
carrier are securely locked to the stroller
• NEVER lift stroller by infant carrier handle
• Read all warnings on front page of this
instruction booklet and on product
WARNING:
PREVENT SERIOUS INJURY OR DEATH FROM FALLS
click!
align car seat and
set it into adapter
Push down on handle to ensure that
stroller is fully open and locked in position
!
lift handle up to unfold
4
3
push to release locking clip
click!
click!
1
2
3 5
attaching car
strap adapter
4
align car seat adapter with arrow
pointing forward and push down onto
frame
arrow faces
forward
IMPORTANT! REAR FACING ONLY!
Do NOT install forward facing.
!
to release, undo strap
and lift up by handle
IMPORTANT! Pull up on
car seat to confirm that
it is secured properly
!
feed
through both
belt paths!
snap buckle
and pull
tight!
FRONT
To Next Page
Loading...
