15
troubleshooting
maintenance
If the gate does not close properly:
1. Gate is not properly aligned in the
door frame.
Solution: Loosen all four tension bolts
and reposition gate so that it matches
the “correct” image. Re-tighten
tension bolts.
2. Pressure of tension bolts needs
to be adjusted.
Solution: Loosen or tighten the upper tension
bolts. Ensure the upper latch engages securely
when the gate swings closed, and that it can be
released properly when the release button is
pushed back.
replacement hardware kit #33170-50
• Regularly check tension bolts to make sure the gate is securely in place.
• Do not use the gate if any components are damaged or missing.
• Surface-clean with a damp cloth or sponge, using mild detergent and warm water.
correct!
incorrect!
To order a replacement hardware kit, contact our Consumer Relations Team at 1-401-671-6551
or www.summerinfant.com/contact.
To Next Page
Loading...