QUICK START GUIDE
Charge the Handheld
Charge for 7 hours before first use.
Install the Camera
Plug in camera. Place camera on a
flat surface, such as a tabletop, or
shelf or mount the camera on a
wall using the screw and wall
anchor provided.
tabletop wall mount
Congratulation You are now ready to use your Panorama™ Digital Color
Video Monitor!
SET-UP
1
or
3 sec.
Power on the Camera and
Handheld
Press the ON/OFF/Nightlight button
on the camera and hold for 3
seconds. A green light will appear
near the lens.
Press and hold the power button on
the handheld unit for 3 seconds.
The handheld will automatically
sync with the camera.
(The handheld
unit and the camera are paired at the
factory for privacy reasons. If the handheld
and camera are not paired with each other
for any reason, see pairing section in the
user guide.)
Secure the Camera Cord
NEVER place the camera or cords
within 3-feet of the crib. Secure
the cord to your wall using the 6
security clips included to keep the
cord away from baby’s reach.
3ft.
STRANGULATION HAZARD:
Children have strangled
in cords. Keep this cord
out of the reach of
children (more than 3 ft.
(0.9m) away).
WA R NI N G
Read all warnings prior to using this product.
Screen Icons
Function Buttons
Nightlight On (Red/Blue)
Image Zoom
Temperature
Reception
Current Viewing Camera (1-4)
Battery Life/ Plugged In
Power
Video On/Off
Volume Co n t r o l
Talkback/ Navigate Right
Zoom/Navigate Left
Camera Control/Enter
Menu/Navigate Up
Nightlight/Navigate Down
SCREEN ICONS & FUNCTION BUTTONS 2
Flip out the
kick-stand and
place the
monitor on a
stable, level
surface.
7hr.
Thank you for purchasing the In View™ 2.0 Plus Digital Color
Video Monitor by Summer Infant. This quick start guide will
illustrate the few simple steps to get your device up and
running.
zoom
in & out
2-color
nightlight
secure
signal
recharge
battery
remote
pan/tilt
temp
display
800 ft.
range
talk
back
with remote pan/tilt camera
IN VIEW 2.0 PLUS
QUICK START GUIDE
29740
To Next Page
General