adjusting head support height
3
Place bather into sink as shown. Place baby onto the infant bather.
You may need to adjust the bather head support and recline position depending on the size of your infant.
Follow Step 2 and 3 for adjusting head support and recline position.
Top loops used for smaller size babies
Your head support has two sets of
loops for height adjustment.
Top loops are for use with smaller
size babies.
Side loops are for larger size
babies.
1.
2.
Side loops used for larger
size babies
To secure head support to bather, insert strap through the loops on the head
support depending on the size of your child.
Make sure you use the matching loops on each side of the head support so
that they are level.
To remove head support, remove straps from the loops.
smaller size
babies
larger size
babies
To Next Page
Loading...
