SUN EAST PEAK-350 User Manual

SUN EAST PEAK-350
PEAK-350 LEAD -FREE WAVE SOLDERING SYSTEM
USER MANUAL
Notice:
☆ We should be greatly appreciated for your purchasing PEAK-350 Lead-free Wave
Soldering System made by Sun East.
☆ The installation, operation, maintenance, repair, cautions and warnings specified in this
manual must be followed strictly during operation.
☆ There may appear unexpected accident, product life shortened or performance worsened
under improper operation.
☆ This manual should be handed to the end customers, who should keep it by themselves
for later reference if necessary.

SUN EAST PEAK-350 Specifications

General

Brand	SUN EAST
Model	PEAK-350
Category	Soldering Gun
Language	English

Summary

Safety Precautions

Installation and Wiring

Wiring Danger Warnings

Critical warnings about fire and electric shock during installation and wiring.

Installation Warning

Important warnings regarding waterproofing, installation stability, and environmental factors.

Operation

Operation Safety Warnings

Warnings about electric shock, injury, and handling hot solder during operation.

Maintenance

Maintenance Safety Warnings

Warnings about operator injury, electric shock, and component modification during maintenance.

Solutions to Failure

Chapter III Installation

Preparation Requirements

Calibration

Soldering Pot Adjustment

Preparation before Operation

Online Test of Functions

Performing tests to ensure all machine functions are operating correctly.

Chapter IV Operation Regulation

General Operation Precautions

Software Operation

Manual Operation

Control Panel Functions

Automatic Operation

Chapter V Maintenance

Maintenance Schedule

Component Replacement

Chapter VI Solutions to Failure

Failure Analysis and Solutions

Table for analyzing failures, their possible reasons, and solutions.