Before you Begin:
Thank you for purchasing your Sun Fun Kits DIY battery kit, the diy battery kits makes
assembling your battery quick and easy and only requires basic tools and hardware. We
recommend having a basic understanding of DC wiring in order to assemble your battery pack.
You will also need the following tools:
● Hex driver set: 3mm, 4mm, 5mm, and 8mm
● Insulated drives for securing bolts
● Thread locking compound (such as blue Loctite)
● Kapton tape 1” to 2” in width
● Double Sided Sticky tape
● Velcro style loop
● DC Voltmeter
● DC Power Supply that is able to charge up battery cells (3.65 volts, 20 Amps)
Optional:
● Silicone sealer (for those looking to make a water resistant battery)
● Hot glue gun (if you wish to secure wires using this method)
Page: 2 V1 / V2 Manual - Revision 1.01
To Next Page
Loading...