Preparing your battery cells:
Sun Fun Kits DIY battery kits support various prismatic cells, in this manual we will be using the
EVE 280N type, however the process is the same for other manufacturers such as CATL,
RCPT, and more, be sure to select the correct cell type when purchasing your kit.
Before you can begin organizing your battery pack, you will need to perform a TOP BALANCE
of your battery cells. This process requires you to charge your cells in parallel, meaning you will
join the positive terminal of all your cells into a single circuit and your negative terminals into a
single circuit.
This process is explained in this tutorial video:
https://www.youtube.com/watch?v=JGbZozzCYvM
Assembling your battery cells:
After you have completed top balancing, it is now time to begin battery assembly. Begin by
placing your cells in a series configuration with the left side of the battery having the positive
terminal on the lower left and the negative terminal on the lower right.
Page: 3 V1 / V2 Manual - Revision 1.01
To Next Page
Loading...