Sun-Power Autogates XP Series User Manual

1
Creating jobs in Australia
Smart & Green Auto Gate Operators
Australian made XP Series Automatic Gate Operators
Installation Guide & Owner’s Manual – V10 ©
Protect Your Warranty
• Read this manual before you begin installation
• Follow these instructions carefully.
• Refer to manual during installation.
• Refer to this manual before doing any maintenance.
Take your time - Follow this manual - Get it right - Enjoy the benefits
This Instruction Booklet/Owner’s Manual
should be retained by Gate owner for future reference.
This Manual is available on our web site
www.sungateaustralia.net
129 Gladstone Street, Fyshwick, ACT 2609
Ph: 02-6280 4655 Fax: 02-6280 7592
Email: sales@progressivecontrols.com.au
V10
Version

Sun-Power Autogates XP Series Specifications

General

Brand	Sun-Power Autogates
Model	XP Series
Category	Gate Opener
Language	English

Summary

Essential Information and Safety

Safety Warnings

Critical safety instructions to be followed before installing or using the gate operator product.

Installation Procedures

Standard Installation (Pull)

Step-by-step guide for installing the gate operator in a standard pull configuration.

Master-Slave Connections

Instructions for connecting the slave unit to the master unit in dual gate systems.

Limit Switch Adjustment

Side Mount Installation

Restricted Side Room Installations

Out-Swing Installation (Push)

Control Board Configuration

Gate Operator Control Board Overview

Overview of the main circuit board, its connections, and normal operation diagram.

DIP Switch Configuration

Trimpot Adjustments

Operation Modes and Delay Settings

Troubleshooting and Transmitter Programming

Radio Transmitter Range Issues

Diagnosing and fixing common problems related to poor radio transmitter range.

Programming Transmitters

Guide to re-programming remote controls and wireless keypads for the gate operator.

Transmitter Troubleshooting FAQ