Need help?Do you have a question about the Sun2Solar MLR-T91-SD01 and is the answer not in the manual?
Requirements for installing a solar collector, including pool type and filter system.
Explains how the solar collector is connected and how water is heated.
Lists the tools needed for assembly, not included with the set.
Guidance on selecting the best location for maximum sunlight exposure.
Instructions for cleaning and protecting the solar collector from damage.
Steps to safely store the solar collector during winter to prevent freezing.
Technical specifications for the A/G model, including dimensions and flow rate.
Technical specifications for the I/G model, including dimensions and flow rate.
Step-by-step guide for assembling the solar collector and connecting it.
Specific assembly steps for the A/G model, detailing hose connections.
Specific assembly steps for the I/G model, detailing hose connections.
Instructions on how to properly position the solar collector for optimal performance.
Identifies potential causes and solutions when the pool is not heating.
Addresses issues where initial bubbles do not appear after connecting the equipment.
Explains the cause of air bubbles in the pool return and resolution.
Provides solutions for leaks or water escaping from the system.
To Next Page
General