Sunbeam 30310684 - User Manual

Thank you for purchasing these Sunbeam
®
Wireless Linkable LED Wall Lights.
Please read all instructions before using your new Wireless Linkable LED Wall Lights.
IMPORTANT: FOR INDOOR AND DRY LOCATION USE ONLY. ADHESIVE TAPE MAY DAMAGE
SURFACE IF REMOVED.
SENSING RANGE
SPECIFICATIONS
Motion sensor detection distance: 3 - 5 m / 9.84 - 16.4 ft
Detection angle: 100º
Maximum distance between 2 units: 8 m / 26.2 ft
MODEL # 30310684
ITM. / ART. 1185375
PARTS
Battery type: AA *3 per unit
FUNCTIONS
Rating: max 1W, 4.5V / DC, 2.4 GHz
Photo and Motion
sensor
Timer
switch
Linking indicator light
On / Off /
Linking /
Pairing
button
Photo and Motion Sensor Light
Light automatically turns on when sensor detects motion
and there is a lack of ambient light; automatically turns
off when no motion is detected within the selected time or
there is sufcient ambient light.
Adjustable Timer
Light automatically turns off if no motion is detected by
motion sensor for 15 / 30 / 45 seconds based on timer
switch position.
Linking Indicator Light
The units are linked when the red linking indicator light is
blinking. Linked units will turn on when one of the units
detects motion in low ambient light.
Low Battery Indicator
When batteries are running low, the unit will ash for
10 seconds when it detects motion in low ambient light.
This signals that battery replacement is needed.
IMPORTANT SAFETY INSTRUCTIONS
This device complies with Part 15 of the FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
BATTERY INSTRUCTIONS & CAUTIONS: Always purchase the correct size and grade of battery most suitable for the intended
use. Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
Clean the battery contacts and also those of the device prior to battery installation. Ensure the batteries are installed correctly
with regard to polarity (+ and -). Remove batteries from equipment which is not to be used for an extended period of time.
Remove used batteries promptly. For recycling and disposal of batteries to protect the environment, please check the internet or
your local phone directory for local recycling centers and / or follow local government regulations.
LIMITED WARRANTY
This product is guaranteed to operate a minimum of 1 year from
the original date of purchase. If, under normal use and for the
full time period, your product fails to operate, please return it to:
Quality Control Dept., L’Image Home Products, Inc., 1175 Place
du Frère-André, Montreal, Quebec, Canada H3B 3X9 (with your
original proof of purchase receipt) and we will refund it. This
warranty is considered void if the product fails from misuse.
© 2017 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. SUNBEAM
®
logo is a registered trademark of
Sunbeam Products, Inc. used under license. Distributed by
L’Image Home Products Inc., Montreal, Canada H3B 3X9. LHP1115-090117
For information about ordering parts or
how to expand your kit, please call us at
1-877-383-6399 (8:30 am – 5:30 pm E.S.T.)
Monday - Friday or contact us at
www.limagehomeproducts.com
If you have any problems, please do not contact the store.
Our customer service will be happy to assist you.
Distributed by:
Costco Wholesale Corporation
P.O. Box 34535
Seattle, WA 98124-1535
USA
1-800-774-2678
www.costco.com
MADE IN CHINA
NOTE: A unit in a room with sufcient
ambient light will not illuminate.
Front
127 mm x 279 mm
DATE: Sept 1, 2017
ITEM/SKU #: 15820
DESCRIPTION: 3pk Wireless Linkable Wall light IS
ENG
CUSTOMER/RETAILER: CostcoCan
DESIGNER: SW
279 mm
BLACK
INSTRUCTION SHEET
DIMENSIONLI-314463
127 mm
Claudia Lai

Summary

SPECIFICATIONS

Battery and Rating Information

Details on battery type required per unit and the operational rating including voltage, current, and frequency.

PARTS IDENTIFICATION

Included Components

Lists all parts included in the package, such as LED lights, batteries, adhesive tapes, and mounting hardware.

PRODUCT FUNCTIONS

Sensor and Indicator Functions

Explains the operation of motion sensors, adjustable timers, linking indicators, and low battery alerts for the wall lights.

IMPORTANT SAFETY INFORMATION

General Safety and Compliance

Covers FCC compliance, warnings against modifications, and general usage precautions for indoor and dry locations.

Battery Handling and Disposal

Provides guidelines for battery installation, replacement, cleaning contacts, and proper environmental disposal.

SETUP AND INSTALLATION

Initial Setup Modes

Describes how to set up the units for standalone or linked operation using the timer switch and on/off button.

Mounting Methods

Details the three ways to mount the light units: using adhesive tape, drywall screws, or wood screws.

Pairing Additional Units

Step-by-step instructions for linking multiple units together, including master unit designation and pairing time limits.

TROUBLESHOOTING GUIDE

Light Unit Not Turning On

Addresses issues with the unit not illuminating in standalone or linked modes, including ambient light conditions and battery status.

Linking and Pairing Issues

Covers problems with unit linking, maximum units, distance limitations, and pairing procedures, including time limits.

Battery Replacement and Indicators

Explains how to identify low batteries via flashing lights and whether re-pairing is necessary after battery replacement.

Sunbeam 30310684 Specifications

General

Brand	Sunbeam
Model	30310684
Category	Outdoor Light
Language	English