DISPLAY MARK
Measurerneni in progress
V
Exhausting
A
Insufficient Pressure
-
DESCRIPTION OF DISPLAY MARKS
CONDITION/CAUSE
Heart mark appears during
measurement conditions and
flashes when pulse is de-
tected.
Mark flashes when power is
turned on and there is air re-
maining in the Finger Cuff.
Mark flashes at the com-
pletion of the measurement
until exhaust is complete.
Measurement began, but the
pressure was insufficient.
CORRECTIVE ACTION
Measurement in progress; re-
main quiet.
Automatic exhaust occurs.
Press the Power Button to Off.
Press again to ON, and then
start the measurement again
after
“0”
appears.
To Next Page
Loading...
