Sunbeam EM0480 - Page 2

Product Improvement Centre
EM0480 Recalibration Guide
Page 2 of 3
Step 4
Lift out the top burr from the grind adjustment
collar using the handle, see figure 4.
Step 5
Lift the grind adjustment collar away from the
motor base.
Step 6
Using a 10mm spanner or
socket, unscrew the cap nut in a
clockwise direction.
Tip: To hold the bottom burr in
place while unscrewing the cap
nut, insert a screw driver into the
unit and press it against the burr.
Figure 4
Figure 5