Product Improvement Centre
EM0480 Recalibration Guide
Page 3 of 3
Step 7
Remove the star washer, burr
blade and the lower burr.
Step 8
Add a spacer to make the grind
finer or remove a spacer to make
the grind coarser.
Note: One spacer is
approximately equivalent to 7
graduations on the grind
adjustment collar.
For assembly repeat the above
steps in reverse order.
Caution: During assembly and before securing the lower burr,
ensure the burr location hole is aligned with the burr location pin.
To Previous Page
Loading...
