Operating your coffee grinder
Beforeusingthecoffeegrinder,wipethe
baseexteriorwithadampcloth.Washthe
beanhopper,hopperlidandgroundcoffee
containerinwarmsoapywater,thenrinse
anddry.
Note:Donotimmersetheburrsinwateror
anyotherliquid.
Note: Donotplaceanypartsofthecoffee
grinderinthedishwasher.
1.Placethecoffeegrinderbaseonadry,
levelsurface.
Note: Alwaysensurethatthecollaris
attachedtothecoffeegrinderbasefirst,then
attachthebeanhopper.
2.Positionthecollarsothatthenotchonthe
collarisalignedwiththearrowontherear
ofthegrinderbase.
Seefigure1
3.Nowattachthebeanhopper.Insertthe
beanhopperbyaligningthenotcheson
thebaseofthehopperwiththeguideson
theinsideofthecollar.Positionuntilthe
hoppersitsflat.Seefigure2.
4.Tolockthecollarandbeanhopperinto
place,holdthecollarandturnitclockwise
untilthe‘UNLOCK’buttonreleases.
Seefigure3.
5.Fillthebeanhopperwithcoffeebeans.
Tip:Remembertokeepthehopperfullat
alltimes.Havinganevenweightbearing
downontheburrsisimportanttoensurea
consistentgrind.
Note:Thiscoffeegrinderisintendedtogrind
wholecoffeebeansonly.
6.Placethehopperlidontothebeanhopper.
7.Plugthepowercordintoa230-240VAC
poweroutletandswitchthepoweron.
Figure 1
Figure 3
Figure 2