Need help?Do you have a question about the Sunbeam HE4900 and is the answer not in the manual?
Essential precautions for the safe use and operation of the electrical appliance.
Details the patented heating element designed for faster heating and optimum heat transfer.
Explains the safety auto shut off system that prevents overheating by detecting high temperatures.
Describes the thermostat dial for setting desired temperature levels and maintaining comfort.
Indicates the on/off switch located on the side of the unit for controlling operation.
Details the wall mount bracket for quick and easy installation of the heater.
Instructions for detaching the wall mounting bracket from the rear of the heater.
Guidelines for choosing a suitable location and required clearances for wall mounting.
Steps for marking, drilling holes, and securing the wall mounting bracket.
Procedure for attaching the heater onto the installed wall mounting bracket.
Instruction to remove the wall mounting bracket before attaching the wheels.
Step-by-step guide for attaching the wheel assembly using screws and washers.
Instructions for installing, plugging in, operating the on/off switch, and adjusting the thermostat.
Guidance on using pins to limit or fix the rotation of the thermostat dial.
Steps to reset the heater after the safety auto shut off system has activated.
Methods for cleaning the heater exterior and vents using damp cloths and vacuum attachments.
To Next Page
General
