Glide the shaver gently over the fabric in an up and •
down motion.
To prevent possible damage, do not press down •
heavily.
Care and Cleaning
Empty the fuzz bin after each use.•
Use a damp cloth to wipe the surface of the shaver. •
Do not allow water to enter the inner parts.
If the device will not be used for a long period of •
time, remove the batteries from their compartment.
Place a small amount of lubricating oil on the inner •
side of the metal screen cover after several uses.
If you notice a decrease in effectiveness of the •
shaver, remove the screen cover by turning it
counter-clockwise, and carefully take out the cutting
blade. Clean the blade and inner compartment with
a soft brush. Then, reinstall the blade and tighten the
screen cover. Important: Blades are sharp; please
exercise caution.
This device is equipped with a safety feature, which •
stops operation when the screen cover is loose or
open.
For Your Safety
Use this device only as recommended in this •
manual.
To Next Page
Loading...