Need help?Do you have a question about the Sunbelt SUPREME and is the answer not in the manual?
General| Dimensions | 93" x 93" x 39" |
|---|---|
| Pump | 2 x 5.0 BHP |
| Heater | 5.5kW |
| Voltage | 240V |
| Shell Material | Acrylic |
| Warranty | 5 years |
Emphasizes adult supervision for children and preventing unauthorized spa access.
Details safe distances from metal surfaces and electrical appliances.
Advises on safe water temperatures, precautions for pregnant women, and effects of medication/alcohol.
Warns about suffocation risk and proper ventilation for gas heaters.
Recommends a reinforced concrete slab or pier and beam wood deck for spa support.
Outlines 240V wiring, wire gauge, and 60 amp GFCI breaker for US models.
Notes NEC requirement for breaker box placement at least five feet from the spa.
Step-by-step guide to setting the desired spa water temperature.
Explains the function of the SET key for confirming settings and managing spa operations.
Instructions on how to program the spa's real-time clock.
Explains keys for controlling pumps, air blower, lights, and accessories.
Details keys used for programming temperature, time, and system parameters.
Describes the main control unit and the user interface panel.
Details the pump's role in circulating water and its operation.
Explains how to adjust and maintain the spa's water jets.
Details how the air blower creates bubble effects.
Describes the primary filtration system for water clarity.
Details the ozonator's role in water purification.
Details how to use the drain plug to empty the spa.
Instructions for testing water chemistry using test strips.
Procedure for cleaning spa filters at regular intervals.
Guidelines for cleaning the Lucite Cast Acrylic spa surface.
Tips for cleaning and maintaining the spa's synthetic cabinet.
Recommendations for chemical levels and usage for spa maintenance.
Procedure for draining and refilling the spa every 120 days.
Information on winterizing the spa, recommending professional service.
Steps to ensure the longevity and protection of your spa cover.
Instructions for cleaning the spa cover with recommended agents.
Procedure for removing and cleaning mildew from the spa cover.
Tips to prevent damage to the spa cover's foam core from abuse or external factors.
Guidance on identifying and patching holes in the spa cover liner.
Information on securing the cover and common causes of strap damage.
Advice on managing snow and water to prevent cover damage.
Indicates spa heater housing is below 40°F, affecting heater element status.
Signifies spa temperature exceeds 108°F, preventing new settings.
Activates when HiLimit sensor detects temperature above 112°F, shutting down functions.
Occurs when a sensor is open or disconnected, disabling the heater.
Indicates a shorted sensor, making temperature determination impossible.
Indicates issues with the pressure switch, often related to pump operation or water flow.
Signals a system heartbeat issue, shutting down all devices and rendering the spa unusable.
To Next Page