16-60
Windows 2000 Installation Guide
If a device of the same type has been installed on your machine before and the
drivers that are about to be installed are different from those installed already, the
original drivers need to be uninstalled. Please refer to the uninstalling instruction.
Download the latest available drivers from the FTDI web site and unzip them to a
location on your PC.
Connect the device to a spare USB port on your PC. Once the composite driver
has been installed the Found New Hardware Wizard will launch. Click "Next" to
proceed with the installation.
Select "Search for a suitable driver for my device (recommended)" as shown
below and then click "Next".
To Next Page
Loading...