Suncast BMS8100 - Page 26

Raise roof support bracket ( DD) into position against roof.
Slide roof support bracket ( DD) into front header. Secure
roof support bracket ( DD) to underside of truss leg with
one screw ( JJ).
Attach roof support extension ( BB) to truss legs with
one screw ( JJ), each side.
Secure roof support to roof using three screws ( JJ).
Repeat Steps 36-37 to install and secure remaining
roof support brackets to three outer roof panels.
Secure roof support extension ( BB) to inner roof panel
using two screws ( JJ).
Repeat steps 38-39 to install and secure remaining
extension bracket to other inner roof panel.
26