Suncast Brilliant Everett BMS6511 - Shed Assembly;Headers

Shed Assembly/Headers
Place front header ( K) over door opening and fit the two
protruding support legs on left and right front corners into
pockets molded in front header. Tabs on front header must
be seated in header channel pocket. Secure front header
using two screws ( LL).
Place rear header ( L) over back walls and fit the two
protruding support legs on left and right back corners into
pockets molded in rear header. Tabs on rear header must
be seated in header channel pocket. Secure rear header
using eight screws ( LL).
21