Suncast Brilliant Everett BMS6511 - Page 26

Shed Assembly/Roof ( continued)
Raise front roof support bracket ( SS) into position against
roof. Slide front roof support bracket ( SS)
into front header ( K).
Push down the roof from outside. From inside shed, secure
roof panels together along ridge of roof using four
rubber washers ( II) and four sealing screws ( EE).
Note: For clarity, illustration is shown with front header,
right front corner removed.
Secure front roof support bracket ( SS) to underside
of roof using two screws ( LL). Repeat steps 33-34 for
remaining roof support brackets.
26