14
23. Repeat steps 21 - 22 to install remaining three Post Top Trim
pieces.
24. This Arbor includes brackets to anchor the Posts. The Arbor must be installed on a firm, level surface.
Attach Angle Bracket (M) to bottom of Post using two 2" Deck Screws (N). Attach Bracket to floor, foundation, or
the ground using appropriate fasteners.
NOTE: Use 2" screws if foundation is wood or composite material. If foundation is concrete or other hard
surface, use hard surface fasteners purchased separately. Use Stakes (L) if anchoring to ground.
To Next Page
Loading...
