Suncast CA3500 User Manual

© 2011 Suncast Corporation, Batavia, IL
0660091C
CA3500 / CAS3500
Classic Arbor
OWNER’S MANUAL
WARNING
• Repair or replace broken parts immediately.
• Suncast is not responsible for damage caused by weather or misuse.
• Avoid excess heat from any auxiliary source.
Before you begin...
Read instructions prior to assembly. This product contains parts that can be damaged if incorrectly assembled. Once assembled, the unit cannot be
taken apart without breakage. Please follow instructions. Suncast is not responsible for replacing parts damaged due to incorrect assembly.
Avoid scratching nish. For steps where parts are placed upside down, place parts on a smooth surface to avoid scratching finish. Flatten cardboard
from carton to create a smooth work surface.
Avant de commencer...
Lisez les instructions avant de procéder au montage. Cet article comporte des pièces qui risquent d’être endommagées si ces dernières ne sont pas
installées correctement. Une fois assemblé, l’unité ne pourra pas être démonté sans l’endommager. Veuillez suivre les instructions. Suncast ne peut
être tenu responsable en cas de perte de pièces suite à un montage incorrect. Évitez de rayer le ni. Lors des étapes où les pièces doivent être placées
à l’envers, placez les pièces sur une surface lisse afin d’éviter de rayer le fini.
Aplatissez le carton de la boîte afin de créer une surface de travail lisse.
Antes de empezar…
Lea las instrucciones antes de comenzar a armar. Este producto tiene piezas que pueden dañarse si se arman incorrectamente. Una vez armado, la
unidad no se podrá desarmar sin dañarla. Por favor, siga las instrucciones. Suncast no se hace responsable de piezas dañadas debido a un armado
incorrecto. Evite rayar el terminado. Para realizar las operaciones en las que las partes deben colocarse con la superficie terminada hacia abajo,
coloque las partes sobre una superficie suave para evitar rayar su terminado. Aplane el cartón de la caja de embalaje para crear una superficie de trabajo
lisa y suave.

Suncast CA3500 Specifications

General

Product Type	Deck Box
Type	Storage Box
Material	Resin
Color	Taupe
Use	Outdoor

Summary

Product Overview and Safety

Initial Preparations and Guidelines

Read instructions, avoid scratching finish, and prepare a smooth work surface before assembly.

Important Safety Precautions

Includes warnings about broken parts, misuse, excess heat, and caution notes for safe assembly and usage.

Tools Required for Assembly

Lists essential tools needed, including drill, hammer, ladder, and rubber mallet for arbor construction.

Parts Identification

Main Arbor Components

Identifies major parts like Arches, Posts, Beams, Rails, and Spindles with part numbers and quantities.

Anchor Brackets and Hardware

Details anchor bracket types and various screws and nails required for assembly.

Assembly Procedure

Arches and Arch Supports Assembly

Instructions for assembling the main arch structures using Arches and Arch Supports.

Attaching Posts and Beams

Steps for attaching Posts to the arch assembly and securing Beams to the Posts.

Railing and Spindle Installation

Guide for assembling and attaching the railings and spindles to the arbor structure.

Final Assembly and Anchoring

Instructions for final positioning, attaching rafters, post trims, and securing the arbor to the ground.

Customer Support and Warranty

Replacement Parts and Contact Information

Information on purchasing replacement parts and contacting Suncast customer service for assistance.