Suncast CA3500 - Railing and Spindle Installation

8
11. Locate one Rail (F) and one Handrail (G). Center the Rail
on the flat side of the Handrail.
Secure with three 2 1/2" Screws (BB) inserted through
pre-drilled holes in cutouts of Rail, in positions shown.
12. Locate the four Railing Supports (H). Align the end of
railing assembly (F/G) 1 3/4" from the top and centered
over the pre-drilled holes in the notched end of one
RailingSupport.Seephotoforexactpositioning.
Fasten Railing Support to railing assembly with four 2
1/2" Screws (BB) in pattern shown.
G
F
H
G
F
BB
x4
BB
x3
H
1 3/4"
at side
F
G