7
9. Locate one Beam (E). With at least two people, stand one arch assembly
upright. Insert the tongue, on the end of one Beam, into the receptacle on the
Post (C).
From the inside of Arbor, secure Beam to Post with one 2 1/2" Screw (BB)
angled through Beam and into Post. See Illustration.
With assembly still upright, repeat with second Beam on opposite side of
arch assembly.
10. With at least two people, stand remaining arch assembly upright.
Insert loose ends of both Beams into Post receptacles and secure
with one 2 1/2" Screw (BB) in each Beam in the same manner as
step 9.
E
BB
E
C
insert tongue into receptacle
top view of screw angle
E
C
To Next Page
Loading...
