EasyManua.ls Logo

Suncast PowerWind PWC15O - Attaching and Winding Garden Hose

Suncast PowerWind PWC15O
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Attach Garden Hose.
Hose
Lift and twist tab on hose guide and move it to the far left
position. Guide hose through hose guide and attach to
out-tube. Twist and release tab on hose guide to re-
engage tracker on tracker bar.
Out Tube
8. When attaching the garden hose to the hose reel out-
tube, be sure to attach correctly Cross-threading could
cause permanent damage.
9. Wind or Rewind Hose.
position
Turn water off. When winding hose, Suncast recommends that you
and take the hose accessory off the hose.
Lid must be closed for the motor to run.
bring end of hose back to the front of the hose reel
Flip foot pedal down. Wearing shoes, press foot onto foot pedal to activate rewinding. Foot pedal must be pushed all the
way down to activate the belt. Remove foot from pedal when approximately 3' of hose remains outside the reel. This will
prevent damage caused by the hose hitting inside the unit.
10. Unwind Hose
To unwind hose, pull garden hose straight out from the hose reel. Pull gently as you near the end of the hose.
Correct
Incorrect
Foot Pedal in up position

Related product manuals