SUNCOR STAINLESS, INC. ■ Rivet Nut Installation Tool (S0380-0000) Instructions ■ www.suncorstainless.com ■ August, 2016
©2016 Suncor Stainless, Inc.
Rivet Nut Installation Tool (S0380-0000) Instructions
Rivet Nut Installation Tool Kit Components
• Rivet Nut Installation Tool
• Wrench
• Mandrel – 1/4”-28 RH
• Mandrel – 1/4”-28 LH
• Mandrel – 3/16” 10-24 RH
• Mandrel – 1/4”-20 RH
• Mandrel – 5/16”-18 RH
• Mandrel – 3/8”-16 RH
• Mandrel – 1/4”-20 LH
• Mandrel – M3 x .5
• Mandrel – M4 x .7
• Mandrel – M5 x .8
• Mandrel – M6 x 1.0
• Mandrel – M8 x 1.25
• Mandrel – M10 x 1.5
• Mandrel – M12 x 1.75
Rivet Nut Installation Tool Features
1. Installation Knob
2. Mandrel Stem
3. Outer & Inner
Sheath
4. Locking Nut
5. Scale Identification
6. Mandrel Nozzle
SUNCOR STAINLESS, INC.
Contact Information
Customer Service
(800) 394-2222
(508) 732-9191
Facsimile
(508) 732-9798
Web Address
www.suncorstainless.com
Mailing Address
Suncor Stainless, Inc.
70 Armstrong Rd.
Plymouth, MA 02360
Table of Contents
Rivet Nut Installation Tool Kit Components 1
Rivet Nut Installation Tool Features 1
Installation Steps 2
Changing the Mandrel 2
Manual Release of the Rivet Nut Installation Tool
2
Figure A. Open the handles to thread the rivet nut onto the mandrel
stem.
Figure B. Rotating the outer sheath outward or inward will cause the
working stroke to become longer or shorter respectively.
To Next Page
Need help?
General