Sundstrom SR 99-1 - 2.7 Refit Cover; 2.8 Connect Control Valve Hose; 2.9 Check Pad Fitment; 2.10 Tighten Lid Knobs

Filter change
2020-07-03
OI03H-2818 SR 99-1 7
2.7 Refit the cover.
2.8 Connect the hose
between the control valve and
filter lid by pushing the hose
into the connector.
2.9 Check that the pads on
the cover and end caps fit
into their grooves.
2.10 Tighten the knobs
alternately by hand until the
lid meets the filter housing.