Sunex Tools 66035SJ User Manual

66035SJ 9/6/18
Capacity ................................................................ 3.5 Ton
Low Height ................................................................ 3.85"
High Height ...............................................................21.2"
Overall Length ........................................................28.26"
Overall Width ..........................................................14.72"
Handle Length .............................................................50"
Saddle Diameter .......................................................4.72"
Net Weight ........................................................ 104.7 lbs.
Shipping Weight .................................................. 109 lbs.
SPECIFICATIONS
CONTENTS:
Page 1 Specifications
2 Warning Information
3 Setup Instructions
4 Operating Instructions, Preventative Maintenance, Inspection and Proper Storage
5 Hydraulic Jack Maintenance Guide and Regular Maintenance
6 Troubleshooting, Owner/User Responsibility and Warranty Information
7 Exploded View Drawing and Replacement Parts
OWNER'S MANUAL
66035SJ
CAPACITY: 3.5 TON
STEEL SERVICE JACK
Complies with ASME PASE-2014 Safety Standard © Copyright 2018, Sunex Tools
®
COMPLIES WITH ASME PASE-2014
SAFETY STANDARD
COMPLIES WITH ASME PASE-2014
SAFETY STANDARD

Sunex Tools 66035SJ Specifications

General

Brand	Sunex Tools
Model	66035SJ
Category	Other
Language	English

Summary

Warning Information and Safety

Important Instructions Before Operating

Mandatory reading of the manual, understanding procedures, safety warnings, and maintenance requirements before use.

Nature of Hazardous Situations

Highlights inherent hazards of lifting devices, emphasizing intelligence, care, and common sense for safe operation.

Methods to Avoid Hazardous Situations

Lists crucial steps like reading instructions, inspecting the jack, proper lifting, and using on level surfaces.

Consequences of Not Avoiding Hazardous Situations

Details potential serious or fatal personal injury and property damage from non-compliance with safety guidelines.

Setup Instructions

Handle Assembly

Step-by-step guide for attaching the upper handle to the lower handle and securing it with the handle bolt.

Purging Air from Hydraulic System

Procedure to remove trapped air from the hydraulic system to ensure proper pump stroke and lift.

Operating and Maintenance Procedures

Operation Instructions

Guidance on raising and lowering loads, emphasizing vehicle support with jack stands and safe lifting practices.

Preventative Maintenance

Covers proper storage, lubrication, cleaning, and inspection to prevent wear and ensure longevity.

Inspection Procedures

Details visual checks before each use and recommends professional annual inspections for safety and performance.

Proper Storage

Recommendations for storing the jack in a dry location on a level surface with wheels touching the ground.

Hydraulic Jack Maintenance Guide

Regular Maintenance Schedule

Monthly or as-needed lubrication of pivot points, linkages, and wheel bearings using specified greases.

Troubleshooting and Warranty Information

Troubleshooting Common Problems

Addresses issues like unit not lifting, spongy feel, or not reaching full height, with recommended actions.

Owner/User Responsibility

Stresses the importance of understanding instructions, ensuring operator competence, and maintaining labels.

Limited Warranty

Details the one-year warranty against defects in workmanship and materials, and exclusions.

Parts List and Drawing

Exploded View Diagram

Visual representation of the jack components with reference numbers for identification.

Parts Identification

Table listing part numbers, descriptions, and quantities for available replacement parts.