EasyManua.ls Logo

Sunex 8013ADELUXE User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE Rev. A
7/3/14
© Copyright 2014, Sunex Tools
®
Read and follow all instructions in User's Manual. Do not load
carts beyond rated capacity (350 lbs.). Lock lid and drawers before
moving. Apply brake on locking casters anytime cart is in place.
Units can tip or fall causing damage or personal injury. Cart is
designed to roll easily on flat surfaces and should not be used on
uneven or inclined surfaces. Do not open more than one
loaded drawer at a time. •Do not stand on or step in drawers. • Keep
children away from unit. Wear gloves when lifting edges. This
product may contain one or more chemicals known to the State of
California to cause cancer and birth defects or other reproductive
harm. Wash hands thoroughly after handling. • Failure to heed these
warnings may result in personal injury and/or property damage.
WARNING
Chrome Legs (2)
(With Inserts Installed)
Keys
(Attached
to Legs)
Locking Casters (2)Non-Locking Casters (2)Locking Drawer Assembly
Bottom Tray
Pry Bar Holder
Side Work Bench
Rubber Mallet
Table or Workbench
6mm WrenchPhillips Head
Screwdriver
2 People
Long Drawer Handle (1)
Drawer Handle
Screws (14)
Short Drawer Handles (4)
TOOLS NEEDED
Read and follow all instructions in User's Manual. It is the responsibility of the owner to make sure all personnel
read this manual prior to using the device. It is also the responsibility of the device owner to keep this manual intact
and in a convenient location for all to see and read. If the manual or product labels are lost or not legible, contact
Sunex Tools
®
for replacements. If the operator is not fluent in English, the product and safety instructions shall be
read and discussed with the operator in the operator's native language by the purchaser/owner or his designee,
making sure that the operator comprehends its contents.
Examine box contents, then proceed with following instructions.
M6x42 Bolts,
Nuts, & Washers
(8 Pcs. Each)
OPERATING MANUAL
PARTS LIST
MODEL 8013ADELUXE, 8013ABKDELUXE,
8013ABLDELUXE Rev. A SERVICE CART
WITH LOCKING TOP & DRAWERS
INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH
GUARANTEED TO PERFORM
Question and Answer IconNeed help?

Do you have a question about the Sunex 8013ADELUXE and is the answer not in the manual?

Sunex 8013ADELUXE Specifications

General IconGeneral
BrandSunex
Model8013ADELUXE
CategoryTool Storage
LanguageEnglish

Summary

OPERATING MANUAL

PARTS LIST

Lists all components included in the product package for verification.

TOOLS NEEDED

Lists the necessary tools required for assembling the service cart.

WARNING

Provides essential safety precautions and warnings for operating and assembling the service cart.

ASSEMBLY INSTRUCTIONS

Step 1: Assembly preparation

Prepare the workspace and position the main drawer assembly for attaching the legs.

Step 2: Connecting legs and side accessory to drawer assembly

Attach chrome legs and a chosen side accessory (Pry Bar Holder or Side Work Bench) to the drawer assembly.

Step 3: Connecting the bottom tray to the chrome legs

Secure the bottom tray to the chrome legs using bolts.

Step 4: IMPORTANT: Tighten all bolts

Tighten all previously inserted bolts to ensure the cart's alignment and stability.

Step 5: Attaching handles to drawer faces

Attach the drawer handles to the front of each drawer using screws.

Step 6: Attaching casters

Install the casters onto the bottom of the chrome legs, ensuring locking casters are on the same end.

PARTS BREAKDOWN

REPLACEMENT PARTS LIST

Details available replacement parts for the service cart, including part numbers and descriptions.