Sunex SX232B User Manual

SX232B: Parts Breakdown & Operating Manual Rev. 6/27/16
© Copyright 2016, Sunex Tools
®
Operating Instructions • Warning Information • Parts Break down
SX232B
1/4" DRIVE ANGLE
DIE GRINDER
Max. Free Speed ....................... 20,000 RPM
Collet Size ................................................ 1/4"
Average Air Consumption ...................4 CFM
Air Inlet .............................................1/4" NPT
Air Supply Hose Size ........................ 3/8" I.D.
Length .................................................... 6.38"
Weight .....................................................1 LB
Sound Level .................................... 93.6 dBA
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WARNING
RATED RPM OF ACCESSORY USED
MUST EXCEED THE MAXIMUM TOOL
RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
WHEN OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
WARNING
RPMRPMRPM

Sunex SX232B Specifications

General

Brand	Sunex
Model	SX232B
Category	Angle grinder
Language	English

Summary

Die Grinder Specifications and Warnings

Tool Specifications

Lists key technical details of the Die Grinder including speed, air consumption, and sound level.

Chemical Exposure Safety

Details on chemicals in dust from construction activities and associated health risks.

General Operation Safety

Highlights safety for accessories, tool operation, and personal protective equipment.

Comprehensive Safety Warnings

Mandatory Safety Precautions

Covers reading manuals, proper air pressure, protective gear, tool handling, and avoiding hazards.

Accessory and Usage Guidelines

Details on correct accessory use, prohibited modifications, and safe operational practices.

Parts Breakdown and Assembly

Motor Housing Assembly

Diagram and parts list for the motor housing and its components.

Air Motor Assembly

Diagram and parts list for the air motor and its components.

Angle Head Assembly

Diagram and parts list for the angle head and its components.

Operational Guidance

Air Supply Requirements

Details on recommended air pressure, hose size, and air quality for optimal tool performance.

Tool Operation Procedures

Instructions on mounting accessories, starting the tool, and safe operating practices.

Troubleshooting Common Issues

Guidance on diagnosing and resolving problems like loss of power or erratic action.

Lubrication and Maintenance

Procedures for daily lubrication and essential maintenance tasks.

Limited Warranty Information

Warranty Terms and Conditions

Details the one-year warranty, coverage limitations, and customer responsibilities.

Warranty Service and Contact

Information on how to obtain warranty service and contact Sunex Tools.