What to do if my SUNFEEL LD7003 Washer does not intake water?
If your SUNFEEL Washer isn't taking in water, here are a few things to check: * Make sure the water tap is fully turned on. * Inspect the water inlet hose for any twists or kinks and untwist it. * Check the water inlet hose and inlet filters for clogs and clean them if necessary. * Ensure that the machine door is completely closed.
What to do if my SUNFEEL LD7003 Washer does not discharge water?
If your SUNFEEL Washer isn't discharging water properly, consider the following: * Inspect the drain hose for any clogs or twists; clean or untwist as needed. * Clean the pump filter to remove any blockages. * Make sure that the laundry is spread evenly in the drum.
How to fix a SUNFEEL LD7003 Washer that won't start?
If your SUNFEEL Washer isn't starting, there are several potential causes: * Ensure the machine is properly plugged into a working outlet. * Check the fuses and replace them if they are faulty. * Verify that there is mains power supply. * Make sure you have pressed the Start/Pause button. * Confirm that the program dial is set to the desired position. * Ensure the machine door is completely closed.
Why does my SUNFEEL LD7003 vibrate so much?
If your SUNFEEL Washer vibrates excessively, it might be due to several reasons: * Ensure the feet of the machine have been properly adjusted. * Check that the transit bolts, used for transportation, have been removed. * Avoid setting up your washing machine on a hard surface. * Do not overload the drum. Spread laundry evenly in the drum.
Why is there excessive foam in the detergent drawer of my SUNFEEL LD7003 Washer?
If you see excessive foam in the detergent drawer of your SUNFEEL Washer, it's likely due to: * Using too much detergent. To stop the foam, press the Start/Pause button. Dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press the Start/Pause button after 5-10 mins. * Using the wrong type of detergent. Only use detergents specifically produced for automatic Washing Machines.
Why does the spin cycle not take place in my SUNFEEL Washer?
If the spin cycle on your SUNFEEL Washer is delayed or not happening, it could be that the unbalanced load control system has been activated. This system will attempt to spread your laundry. Once the laundry is spread, the spinning cycle will begin. For future washes, load the drum evenly.
Why is my SUNFEEL Washer not cleaning clothes properly?
If the washing result from your SUNFEEL Washer is unsatisfactory, consider these points: * Your washing may be too dirty for the programme selected. Use the information in the programme tables to select the most appropriate programme. * You may not be using enough detergent. Use the amount of detergent as instructed on the packaging. * There may be too much laundry in your machine. Check that the maximum capacity for the selected programme has not been exceeded.
Why does my SUNFEEL Washer discharge water as soon as it is loaded?
If your SUNFEEL Washer immediately discharges water as soon as it's loaded, it's likely because the end of the water drain hose is too low. Ensure the drain hose is positioned at a suitable height.
Why do grey spots appear on laundry after washing in my SUNFEEL LD7003 Washer?
If you notice grey spots appearing on your laundry after washing in your SUNFEEL Washer, it could be due to untreated oil, cream, or ointment on the laundry. In the next wash, use the amount of detergent as instructed on the packaging.
Why does my laundry have detergent residue after washing in my SUNFEEL LD7003?
If you find detergent residue on your laundry after using your SUNFEEL Washer, it may be due to non-dissolving particles in some detergents appearing as white spots. Try performing an extra rinse or cleaning your laundry with a brush after it dries.
Key safety advice for appliance operation and user protection.
Details risks of burns, electrical shock, and other critical dangers.
Warnings related to fire, water damage, and electrical current hazards.
Guidelines for child safety and safe handling of the washing machine.
Advice on safe operation, installation, and warranty considerations.
Information on packaging materials and proper disposal of the old machine.
Advice on optimizing efficiency and reducing consumption during use.
Visual identification of machine components and their locations.
Specifications including voltage, current, power, capacity, dimensions, and performance.
Step-by-step instructions for removing transport safety bolts before use.
How to level the washing machine using adjustable feet for stability.
Proper connection to the power supply, including voltage and earthing.
Instructions for connecting the water supply hose securely and correctly.
Guidance on connecting the drain hose to a standpipe or sink.
Details on the detergent drawer compartments and their uses.
How to select wash programs using the program dial.
Understanding the symbols and indicators on the electronic display panel.
Sorting, care labels, and pre-wash preparation of clothes.
How to load laundry evenly and avoid overloading the drum.
Correct placement and amount of detergent and softener.
Steps for starting the washing machine after loading and adding detergent.
Guidance on choosing the most suitable program for different laundry types.
How to select and use extra functions like temperature and spin speed.
Explanation of specialized functions for enhanced washing performance.
How to activate child lock and cancel an ongoing wash cycle.
What happens at the end of a wash cycle and post-wash actions.
Comprehensive table detailing programs, temperatures, loads, and durations.
Important precautions and forbidden cleaning agents.
Instructions for cleaning the water inlet filters to ensure proper water flow.
Steps to clean the pump filter for optimal machine performance.
How to remove and clean the detergent drawer to prevent residue build-up.
Methods for cleaning the drum and the external body of the machine.
Solutions for problems like the machine not starting or not taking in water.
Troubleshooting steps for water discharge problems and excessive machine vibration.
Advice for issues related to excessive foam and poor washing outcomes.
Explanation of automatic fault detection system and common error codes.
Explanation of the energy efficiency label symbols and ratings.
Recommendations for reducing energy and water consumption during use.
To Next Page
General