A-2
User's Manual: Radiant Heater
Troubleshooting
Heater Fails to Start Solution
No Power Check Power Cord or Breaker
No Fuel Check Tank Bleed Pump or look for suction Leak
Gelled Fuel Warm Fuel add Anti-gell Additive
Tip Switch Move Heater to Level Surface
Plugged Nozzle Replace Nozzle
Electrodes fouled or out of Adjustment Clean and Adjust Properly
Primary Control Locked Out Hold Reset Button
Cad Cell Dirty or Defective Clean or Replace
Erratic Flame Solution
Suction Leak Tighten Suction Lines
Dirty Nozzle Replace Nozzle
Fouled Electrodes Clean
Dirty Fuel Filter Replace
To Next Page
Loading...
