Need help?Do you have a question about the Sunfire TGA-7201-230 and is the answer not in the manual?
Details the available TGA-7401 and TGA-7201 models and their power differences.
Instructions for safely removing the amplifier from its packaging and retaining materials.
Guidance on selecting a location and precautions for setting up the amplifier.
Describes the controls and indicators present on the front of the amplifier.
Details the various inputs, outputs, switches, and connectors on the rear panel.
Shows how to connect using standard RCA cables for audio signals.
Demonstrates connecting with XLR cables for improved noise rejection.
Explains how to connect speakers for biamping to enhance performance.
Outlines how to connect speakers using biwiring for improved sound.
Details how to connect speakers in series, increasing total impedance.
Details how to connect speakers in parallel, decreasing total impedance.
General| Amplifier Class | Class AB |
|---|---|
| Channels | 2 |
| Power Output per Channel (8 Ohms) | 200 Watts |
| Power Output per Channel (4 Ohms) | 400 Watts |
| Total Harmonic Distortion (THD) | < 0.1% |
| Signal-to-Noise Ratio | > 100 dB |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Damping Factor | 200 |
To Next Page
