Need help?Do you have a question about the Sungrow PowerStack-ST570kWh-250kW-2h-US and is the answer not in the manual?
General| Model | PowerStack-ST570kWh-250kW-2h-US |
|---|---|
| Energy Capacity | 570 kWh |
| Power Rating | 250 kW |
| Discharge Duration | 2 hours |
| Nominal AC Power | 250 kW |
| Usable Energy | 570 kWh |
| Duration | 2 hours |
| Capacity | 570 kWh |
| Region | US |
| Application | Commercial and Industrial |
Requirements for technicians performing installation and maintenance.
Critical safety information regarding high voltages and electrical hazards.
Safety guidelines for moving the equipment.
Safety rules for installation and electrical connections.
Safety precautions during operation and maintenance procedures.
Guidelines for environmentally sound disposal of the product.
Overview of the integrated energy storage system and its applications.
Description of the physical appearance and components of the BESS and PCS.
Detailed appearance of the Battery Energy Storage System (BESS).
Technical specifications for the dimensions of the BESS and PCS units.
Explanation of the air intake and exhaust system for BESS and PCS.
Overview of the internal components and system integration.
Identification of main electrical equipment within the BESS.
Technical specifications and parameters for individual battery cells.
Details on the LFP battery module composition and parameters.
Parameters for battery clusters, including models and specifications.
Diagrams illustrating how battery modules are stacked in various configurations.
Product appearance and component description of the SC60HV unit.
Important warnings and considerations before transporting or storing the ESS.
Methods for transporting the ESS by road and sea.
Specific requirements and safety guidelines for loading, unloading, and transporting the ESS.
Conditions and guidelines for proper storage of the ESS.
Steps for inspecting deliverables and the product before installation begins.
Verifying that all delivered items match the packing list.
Checking the ESS and its internal equipment for any damage.
Requirements for the site where the ESS will be installed.
Considerations for selecting a suitable installation site based on climate and geology.
Detailed requirements for constructing a proper foundation for the ESS.
Recommended spacing around the ESS and PCS for ventilation and maintenance.
Guidelines for moving the ESS and PCS using a forklift.
Procedures and safety precautions for lifting and transporting the equipment.
Safety rules to follow when operating cranes during lifting operations.
Detailed steps and requirements for the vertical lifting of devices.
Methods for securing the container to the foundation.
Critical safety warnings related to high voltage and electrical connections.
General wiring diagram and overview of the ESS electrical connections.
Tools and steps required before performing electrical wiring connections.
Procedure for establishing a proper ground connection for the system.
Safety guidelines and warnings for battery connection and maintenance.
Steps and tools for connecting power cables between battery packs.
Procedures for safely powering on the energy storage system.
Checklist of items to verify before initiating system power-up.
Step-by-step guide to power up the PCS and BESS cabinets.
Procedures for safely shutting down the energy storage system.
Steps for a controlled shutdown of the system via software and switches.
Compliance with fire laws and regular maintenance of fire equipment.
Description of the BESS water fire suppression system and its detectors.
How combustible gas detection triggers the exhaust system.
Safety warnings and conditions to observe before performing maintenance.
Schedule and items for routine maintenance tasks.
Two-year maintenance checks for system status, warning marks, and corrosion.
Annual checks for external and internal container conditions.
Semi-annual to annual maintenance checks.
Recommended maintenance procedures for the liquid cooling system.
Procedures for maintaining the external container appearance and components.
Steps for cleaning the container's exterior surfaces.
Technical specifications and data for the ESS and PCS.
Recommended torque values for various bolt sizes during installation.
Warranty terms, conditions, and exclusions of liability.
Contact details and required information for product support.
To Next Page