To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SC2750UD-MV and is the answer not in the manual?
General| Rated Power | 2750kW |
|---|---|
| Max. DC Input Voltage | 1500V |
| Rated AC Output Power | 2750kW |
| Rated Grid Frequency | 50Hz / 60Hz |
| THDI | < 3% |
| DC Switch | Yes |
| AC Switch | Yes |
| Cooling Method | Forced air cooling |
| Weight | 3500 kg |
| Dimensions (W x H x D) | 2800 mm x 2200 mm x 1000 mm |
| Maximum Efficiency | 99% |
| MPPT Voltage Range | 600 V - 1500 V |
| Grid Frequency Range | 47 ~ 52Hz / 57 ~ 62Hz |
| Protection Class (According to IEC 62109-1) | Class I |
| Operating Ambient Temperature Range | -25 ~ +60°C (> 55°C Derating) |
| Relative Humidity | 0 ~ 100% |
| Operating Altitude | Up to 4000 m |
| Communication Interface | Ethernet |
Covers specific hazards and precautions for installation, operation, and maintenance.
Critical safety warnings and rules for performing electrical connections on the PCS.
Essential safety measures and prerequisites for the commissioning process.
Verifies cable connections, PCS status, batteries, and grid voltage before starting.
Steps for initiating PCS startup and confirming successful commissioning.
Detailed inspection and steps for starting the PCS.
Safe methods for stopping the PCS during normal operations or emergencies.
Safety guidelines and initial steps for identifying and diagnosing PCS faults.
A comprehensive list of PCS faults and their corresponding corrective actions.
