EasyManua.ls Logo

Sungrow SH6.0RT Faq

Sungrow SH6.0RT
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
© 2021 Sungrow. All rights reserved. Subject to change without notice. Version 1.1
Sungrow Deutschland GmbH | Balanstr. 59 | 81541 München | www.sungrowpower.com
3-phase Hybrids-FAQ
Replacement or expansion of residential energy
storage battery module
Applicable to: SBR HV Batteries
Scenario:
1. If the customer needs to add more battery modules (for example, add two
battery modules to an existing SBR096).
2. If one battery module is faulty and new battery module needs to be
replaced.
3. If two battery modules need to be removed.
Solution:
For scenarios 1 and 2, the battery modules in use need to be charged or discharged
to SOC of the new battery. New battery’s SOC can be estimated with knowing
manufacturing date and storage time. (see below table)

Other manuals for Sungrow SH6.0RT

Question and Answer IconNeed help?

Do you have a question about the Sungrow SH6.0RT and is the answer not in the manual?

Sungrow SH6.0RT Specifications

General IconGeneral
Number of MPPTs2
Rated Grid Frequency50 Hz / 60 Hz
Power Factor at Rated Power1
Power Factor0.8 leading - 0.8 lagging
THDi< 3 %
Efficiency98.4 %
Protection ClassIP65
Rated Output Power6000 W
Max. Output Power6600 W
Rated AC Output Power6000 W
Max. AC Apparent Power6600 VA
Rated AC Voltage230 V
DC SwitchYes
Operating Temperature Range-25°C to 60°C

Related product manuals