To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SH10RT and is the answer not in the manual?
General| Model | SH10RT |
|---|---|
| Category | Inverter |
| Rated Power | 10 kW |
| Max. DC Input Voltage | 1100 V |
| AC Output Voltage | 230 V |
| Max. Efficiency | 98.4% |
| IP Rating | IP65 |
| Max. DC Input Power | 15 kW |
| Start Voltage | 180 V |
| Number of MPPTs | 2 |
| Max. Output Current | 16 A |
| Rated Grid Frequency | 50/60 Hz |
| THDi | <3% |
| European Efficiency | 98% |
| Max. Charging/Discharging Power | 10 kW |
| Max. Charging/Discharging Current | 25 A |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural Convection |
| AC Voltage Range | 180 V - 280 V |
| Power Factor | 0.8 leading to 0.8 lagging |
Provides critical safety guidelines for electrical connections to prevent shock and damage.
Lists precautions to ensure safe operation of the inverter and prevent injury or damage.
Specifies safety procedures and precautions for performing maintenance tasks on the inverter.
Explains how to connect multiple hybrid inverters in parallel for grid-connected operation.
Describes the configuration and requirements for connecting inverters in parallel for off-grid operation.
Describes integrated safety functions like short circuit protection and overvoltage protection.
Explains DC to AC conversion, battery charging/discharging, and MPP tracking.
Outlines compatible batteries and the inverter's battery management system.
Details emergency and normal charge management strategies for Li-ion batteries.
Explains discharge management to protect the battery from deep discharging.
Outlines crucial safety precautions to be observed during the mechanical mounting process.
Provides guidelines for selecting an appropriate installation location for optimal performance and safety.
Details the step-by-step process for mounting the inverter on the wall.
Provides critical safety guidelines for all electrical connection procedures.
Explains the function and location of each terminal on the inverter.
Presents the system wiring diagram and lists cable requirements for connections.
Details the importance and procedures for external protective grounding.
Connecting the AC power cable to the inverter.
Lists requirements for AC connection, including circuit breakers and monitoring.
Provides step-by-step instructions for assembling the AC connector for the inverter.
Guides on how to connect the assembled AC connector to the inverter.
Provides safety and connection instructions for DC cables from PV strings.
Connecting communication cables to the inverter.
Explains how to connect the Smart Energy Meter for feed-in power limiting.
Provides crucial warnings and procedures for connecting the battery to the inverter.
Details connecting the power cable between the battery and the inverter.
Lists checks to perform before starting the inverter commissioning process.
Outlines the step-by-step procedure for the initial startup and commissioning of the inverter.
Details steps for preparing the mobile app, including installation and account registration.
Guides on creating a new plant configuration within the iSolarCloud App.
Explains the methods for downloading and installing the iSolarCloud App on mobile devices.
Guides users through the account registration process for the iSolarCloud App.
Details the requirements and procedures for logging into the iSolarCloud App.
Setting up initial parameters for the inverter and system.
Explains how to configure feed-in limitation to control power export to the grid.
Provides safety precautions and steps for safely disconnecting and removing the inverter.
Outlines the steps for safely decommissioning the Li-ion battery system.
Lists common alarms, their IDs, and corrective measures for troubleshooting.
Provides important notices and guidelines for performing maintenance on the inverter.
