63
6.7.2 WiNet-S Connection
The WiNet-S module supports Ethernet communication and WLAN communication. It is not
recommended to use both communication methods at the same time.
(A) Inverter (B) Router/Switch (C) iSolarCloud server
(D) iSolarCloud App (E) iSolarCloud
(1)
Internet (2) Local access (3) Remote
For details, see the quick guide for the WiNet-S module. Scan the following QR code for the
quick guide.
6.7.2.1 Ethernet Communication
step 1 (Optional) Strip the insulation layer of the communication cable with an Ethernet wire strip-
per, and lead the corresponding signal cables out. Insert the stripped communication cable
into the RJ45 plug in the correct order, and crimp it with a crimper.
User Manual 6 Electrical Connection
To Next Page
Loading...
