Need help?Do you have a question about the Sungrow SH20T-V11 and is the answer not in the manual?
General| Max. Input Voltage | 1100 V |
|---|---|
| Start Voltage | 200 V |
| Number of MPPT | 2 |
| Max. Input Current per MPPT | 26 A |
| Rated AC Output Power | 20000 W |
| Rated AC Voltage | 400 V |
| AC Voltage Range | 310 V - 480 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion | <3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Efficiency | 98.6% |
| Cooling Method | Smart Forced Air Cooling |
| Max. DC Input Voltage | 1100 V |
| Rated Output Power (W) | 20000 W |
| Input Voltage Range | 200 V - 1000 V |
| Max. AC Output Power | 22000 W |
| Operating Temperature Range | -25°C to +60°C |
| Max. AC Output Power (W) | 22000 W |
Critical safety measures to follow during the physical installation process.
Precautions for safe electrical wiring and connections to prevent hazards.
Guidelines to ensure safe operation of the inverter and connected systems.
Safety protocols for performing maintenance tasks on the inverter.
Introduction to the inverter's capability as part of a PV Energy Storage System.
How the inverter converts DC to AC power and manages energy flow.
How the inverter manages charging, discharging, and health of connected batteries.
Step-by-step guide for securely mounting the inverter onto a wall.
Critical safety warnings and precautions for performing electrical connections.
Detailed instructions for connecting the AC power cables to the inverter.
Instructions for connecting the DC input cables from PV strings to the inverter.
Instructions for connecting the battery system to the inverter.
Step-by-step guide to start up and configure the inverter for the first time.
Steps to safely disconnect and remove the inverter from the system.
Procedures for safely disconnecting and removing the battery system.
Common alarm IDs and their corresponding corrective actions for issue resolution.
Important notices and safety precautions before performing maintenance.
To Next Page
