Need help?Do you have a question about the Sungrow SH3K6 and is the answer not in the manual?
General| Model | SH3K6 |
|---|---|
| Max. Input Voltage | 600 V |
| Number of MPPTs | 2 |
| Total Harmonic Distortion | < 3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Cooling Method | Natural convection |
| Protection Level | IP65 |
| Nominal AC Voltage | 230 V |
| AC Voltage Range | 180-280 V |
| Output Voltage | 230 V |
| Nominal Grid Frequency | 50 Hz |
| Frequency | 50 Hz |
| Operating Temperature Range | -25°C to +60°C |
| Operating Temperature | -25°C to +60°C |
| Humidity | 0% - 100% |
Essential safety rules applicable to all operations involving the inverter.
Danger and warning notices specific to inverter handling, voltage, and components.
Describes integrated protection, earth fault alarm, and auto-test features.
Critical safety warnings before and during the physical installation process.
Step-by-step guide for physically attaching the inverter to its mounting bracket.
Instructions for correctly connecting the protective earth terminal for safety.
Instructions for connecting single-phase and three-phase energy meters.
Steps for connecting the inverter to the utility grid, including AC connector assembly.
Guidelines for configuring and connecting PV strings to the inverter.
Procedures for connecting power, CAN, and temperature sensor cables for batteries.
Checklist for verifying all installation aspects before initial startup.
Guided procedure for first-time system setup and configuration via LCD.
How to interpret LED status and resolve basic issues.
Guide to viewing and diagnosing errors shown on the inverter's LCD screen.
To Next Page
